Setting Static IP on Tajima MX and MB model Sewing Machines - How to Instructions

Setting Static IP for/On the Tajima Machine:

 

Note: Please use the latest software for the machines. 

 

*For MX and TMB model machines (TEMX, TFMX, TUMX, TCMX, TMBR, TMBP, TMBU)

 

You have "IPSetting.ini" file in the Machine system Files. 
NOTE* these files are provided with your machine and are normally on a USB Drive

NOTE**  Save a copy of the original [ IPSetting.ini ] file on the USB drive by making a copy and changing the name to> IPSettingOLD.ini  ( The copy can be stored on the same USB drive as the other Machine system files )  ^{* this will insure you will always be able to revert back to the original settings easily.} 

 

{NEXT}> Open the file ipsetting.ini using "Notepad" and edit the following Yellow Highlighted IP address.  

a.  change the IP address , (( this will be the IP Address you are assigning to the MACHINE )) 

 

b.  Change the [  DHCP=1  ] to [ DHCP= 0  ]  * See area to change in image  { 1 = DHCP is ON  and 0 = DHCP is OFF }
 

 

NOTE*  If you want to set the Sewing MACHINE  to look for the Design Spooler Client Computer that is Set on a Static IP
        the directions below will show you how to do this in the same file at the same time.  

 

Set Sew Machine to look for Design Spooler Computer set to a Static IP -

NOTE*

You will need to change the IPsetting.ini file that is included with your Sewing Machines Firmware.  You must have your sewing machines firmware that came with your machine on a USB drive when following the directions to set the static IP on your Tajima Sewing Machine

 

*For MX and TMB series  machines

You have "IPSetting.ini" file in the Machine system Files. 
NOTE* these files are provided with your machine and are normally on a USB Drive

{NEXT}> Open the file using "Notepad" and edit the following red square part.

 

 

 

FIX=0  >When you specify the IP address of Design Spooler Client computer, change "0" to "1".

 

IP Address = 192.168.0.100 { change this to Specify the IP address which you set for the Design Spooler (DS) computer}

 

  

FIX=0 [0=off]          the machine tries to find DS computer in the network using broadcasting or DCHP

 

FIX=1  [1=ON]         the machine directly connects to DS computer which has the IP address XXX.XXX.XXX.XXX

 

 

 

So it can be as follow if we use the IP address 192.168.0.101.

 

 

 ------------------------------------------------------------------------------------------------------------------