Follow

WINDOWS 8.1, 8 and 7 - DGML V14 (2010) Download - Compatible Version with install instructions 14.1.6.5388

Download DG/ML by Pulse Version 14 for Windows 8.1,8 and 7>  Compatible version 

NOTE*

This update applies to customers who have already purchased and are currently using version 14 (2010) and are using Windows 8.1, 8 or 7 **. 

 

**  Like all operating systems before it, Windows 7 will eventually reach the end of its lifecycle, making an operating system upgrade an absolutely essential task for the safety of your PC.

When does Microsoft support for Windows 7 end?

Microsoft ended mainstream support for Windows 7 on January 13, 2015, but extended support won’t end until January 14, 2020.

 

 **** If your computer operating system is Windows 10 please search for the Version 14 download for this operating systems ****

 

If you have a previous version of Tajima DG/ML by Pulse or Pulse Signature (including Version 13) and wish to download the latest maintenance release available, please type "Version Download "in to the knowledge base search field.  You will be presented with available downloadable versions.** See what's new in this update by downloading the What's new PDF below

 

NOTE* This is the last release of the Pulse embroidery software that will allow the opening of version 9 and older Pulse format POF files.

 

 

Installation Instructions:

 

Step 1) Click  the DGML icon to download software and save to your desktop.

  • Windows 8.1, 8 and 7 Compatible

https://www.dropbox.com/s/zil3i8tdlig6pg4/DGML_setup%2014.1.6.5388-2.exe/

 

 

 


 

Step 2) Once downloaded - your web browser should display a prompt to run the file

Step 3) A window will pop up >  Asking "Do you want to allow the following program to make changes to this computer?", please click YES to proceed with the installation.  This will begin the InstallAware Wizard.  Note, if InstallAware is new on your computer there will be a few pre-requisite screens before the Wizard begins, please click [Next] on each screen to continue to this verification window.                                          

2_Install_Wizard.png

 

Step 4) Select your language...the default is English however, there are other choice in the drop box (click the small black down arrow for other options), click [OK]
 4_Language_setup.png

Step 5)  Welcome to Tajima DG/ML by Pulse setup, please click [Next]

4a_Welcome_to_Tajima.png

Step 6) Read the User License, click the box next to "I accept the license agreement" if you agree and click [Next]

 9 accept ULA.png

Step 7) On the Product Registration screen enter your User Name and Company Name, click [Next]

10_User_Information.png

Step 8) For an initial installation, "Complete Setup" is the default and correct selection, please don't change this unless advised by technical support click [Next]

11_Destination_Folder.png

Step 9)  The default software destination folder will install in the Program Files(X86) folder, this should not be changed under normal circumstances; click [Next]

14_Destinationa_Folder.png

Step 10)  The Start Menu group will display and you can select shortcuts for Just You or for All Users(default), click [Next]

15_Start_Menu_Group.png

 

Step 11)  You have completed the basic setup and Tajima DG/ML is now ready to install, please click [Next]

16_Ready_to_Install.png

Step 12)  While Tajima DG/ML by Pulse is installing you will see a green progress bar until complete; please be patient this may take some time depending on your internet connection!

17_Software_Install.png

Step 13)  You have several options on completion...check the box next to Run Tajima DG/ML by Pulse 14 now to begin right away or uncheck to begin at another time from the desktop shortcut that was created during installation.  Before launching please plug in your security device!  Now click [Finish]

18_Successful_Installation.png

Step 14)  Oops!  If you clicked [Finish] or launched the software from the desktop shortcut before you plugged in your security device you will receive this error.  No trouble, just plug the device in now and launch from the desktop shortcut, it's that easy!

19a_device_error.png 

 

 

Was this article helpful?
2 out of 2 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk