Follow

DGML V13 (2009) Download - Latest Version with install instructions

Download DG/ML by Pulse Version 13.1.5.4196 >  Latest version

 

Version 13(2009) will become unsupported in 2018 when Pulse releases the new Tajima DG16 by Pulse, please ask your support representative about the benefits of updating to the current version of Tajima DG by Pulse today!

NOTE*

This update applies to customers who have already purchased and are currently using version 13 (2009) or have received a security device update to update your version to version 13.   Please contact your local distributor if you have an older version and wish to purchase the current version 15.  If you have a previous version of Tajima DG/ML by Pulse or Pulse Signature (including Version 13) and wish to download the latest maintenance release available, please type "Version Download "in to the knowledge base search field.  You will be presented with available downloadable versions.** See what's new in this update by downloading the What's new PDF below

 

Installation Instructions:

 

Step 1) Click on the DGML icon to download software and save to your desktop.

https://www.dropbox.com/s/cdn7l93qqr8trhc/V13%202009%2013.1.5.4190.exe

 

    

 

Step 2) Once downloaded - your web browser should display a prompt to run the file.

Step 3) A window will pop up >  Asking "Do you want to allow the following program to make changes to this computer?", please click YES to proceed with the installation.  This will begin the InstallAware Wizard.  Note, if InstallAware is new on your computer there will be a few pre-requisite screens before the Wizard begins, please click [Next] on each screen to continue to this verification window.                                         

1_InstallAware_Wizard.png

 

Step 4) Select your language...the default is English however, there are other choice in the drop box (click the small black down arrow for other options), click [OK] 4_Language_setup.png

Step 5)  Welcome to Tajima DG/ML by Pulse setup, please click [Next]

3_Welcome.png

 

Step 6) Read the User License, click the box next to "I accept the license agreement" if you agree and click [Next]

4_License_Agreement.png

 

Step 7) On the Product Registration screen enter your User Name and Company Name, click [Next]

5_registration.png

 

Step 8) For an initial installation, "Complete Setup" is the default and correct selection, please don't change this unless advised by technical support click [Next]

6_setup_type.png

 

Step 9)  The default software destination folder will install in the Program Files(X86) folder, this should not be changed under normal circumstances; click [Next]

7_destination_folder.png

 

Step 10)  The Start Menu group will display and you can select shortcuts for Just You or for All Users(default), click [Next]

8_start_menu.png

 

Step 11)  You have completed the basic setup and Tajima DG/ML is now ready to install, please click [Next]

9_ready_to_install.png

 

Step 12)  While Tajima DG/ML by Pulse is istalling you will see a green progress bar until complete; please be patient this may take some time depending on your internet connection!

10_wizard_install.png

 

Step 13)  You have several options on completion...check the box next to Run Tajima DG/ML by Pulse 13 now to begin right away or uncheck to begin at another time from the desktop shortcut that was created during installation.  Before launching please plug in your security device!  Now click [Finish]

12_Successful_installation.png

Step 14)  Please read the Tajima DG/ML by Pulse License Agreement and click [I agree] to open the software.

13_DGML_agreement.png

Step 15)  Oops!  If you clicked [Finish] or launched the software from the desktop shortcut before you plugged in your security device you will receive this error.  No trouble, just plug the device in now and launch from the desktop shortcut, it's that easy!

19a_device_error.png

 

   

 

 

 

 

Was this article helpful?
1 out of 2 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk